|Product Name||Eye Cream Tubes|
|Tube Layers:||Double-layers and five-layers plastic|
|Tube Material:||LDPE plastic / Aluminum plastic / Full plastic|
|Tube Color:||White tube, Clear tube, black tube or other color tube|
|Tube Shape:||Round, Oval, Flat / other Special shape|
|Cap Type:||Screw cap, flip top cap, shiny coating cap, lipstic type, eye roll on,etc.|
|Surface Disposal:||Matte, Glossy, Cut out, Pearly, Metallic|
|Cap Material:||Plastic, Acrylic, Aluminum foil, etc.|
PE eye cream tubes cannot print multi-color patterns. Therefore, when designing PE eye cream tubes, it is recommended to design offset-printed text or simple strokes without gradients. This requires a certain degree of art skills for artists. Remember to use vector graphics when designing patterns, because After the bitmap is enlarged, the edges are jagged, which will cause irregular edges during printing, and the silk screen cannot print unclear bitmaps.
Generally speaking, the tube diameter of the eye cream tube is 19mm, and the pattern design cannot be too large. The width of the front LOGO design should not be greater than 25mm, especially the width of the back of the aluminum-plastic tube should not exceed 20mm.